View B141XG08-V3_7863059.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version: 1 total pages: 20 date: 2004/3/10 product functional specification 14.1 inch xga color tft lcd module model name: b141xg08 v.3 ( ) preliminary specification ( ? ) final specification note: this specification is subject to change w i thout notice. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
contents 1.0 handling precautions ........................................................................................................... ............... 4 2.0 general description ........................................................................................................ ....................... 5 2.1 display ch aracteristics .................................................................................................... ................................................. 5 2.2 functional block diagram ................................................................................................... ............................................. 6 3.0 absolute maximum ratings ................................................................................................... ............... 7 4.0 optical characteristics .................................................................................................... ...................... 8 5.0 signal interface ........................................................................................................... ......................... 11 5.1 connectors ................................................................................................................. ..................................................... 11 5.2 signal pin ................................................................................................................. ....................................................... 11 5.3 signal de scription ......................................................................................................... ................................................. 11 5.4 signal electrical character istics .......................................................................................... ........................................... 12 5.5 signal for lam p connector .................................................................................................. ........................................... 13 6.0 pixel format image ......................................................................................................... ..................... 14 7.0 parameter guide line for ccfl inverter ..................................................................................... ...... 14 8.0 interface timings .......................................................................................................... ....................... 15 8.1 tim i ng char acteris tics ..................................................................................................... ............................................... 15 8.2 tim i ng definition .......................................................................................................... ................................................. 16 9.0 pow er consumption .......................................................................................................... ................... 17 10. pow er on/off sequence ...................................................................................................... .............. 18 11.0 reliability /safety requirement ........................................................................................... ............. 19 11.1 reliability te st conditions ............................................................................................... ............................................ 19 11.2 safety .................................................................................................................... ........................................................ 19 12.0 packing dimension ....................................................................................................... .................... 20 13.0 mechanical characteristics ............................................................................................... ............... 21 13.1 lcm outline dim e ns ion (front view) ........................................................................................ ................................. 21 13.2 lcm outline dim e ns ion (rear view) ......................................................................................... ................................ 22 13.3 screw hole depth and center position ...................................................................................... .................................. 22 (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 2/2 www.datasheet.co.kr datasheet pdf - http://www..net/
ii record of revision version and date page old description n e w d e s c r i p t i o n r e m a r k v1. 2004/3/10 all first release na (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 3/3 www.datasheet.co.kr datasheet pdf - http://www..net/
1.0 handling precautions 1) do not press or scratch the surface harder than a hb pencil lead because the polarizers are very fragile and could be easily damaged. 2) be sure to turn off power supply when in serting or disconnecting from input connector. 3) wipe off water droplets or oil immediately. long c ontact with the droplets may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may br eak or crack if dropped or bumped on hard surface. 6) protect the module from static electricity and insure proper groundi ng when handling. static electricity may cause damage to the cmos gate array ic. 7) do not disassemble the module. 8) do not press the reflector s heet at the back of the module. 9) avoid damaging the tft module. do not press the c enter of the ccfl reflector when it was taken out from the packing container. instead, press at the edge of the ccfl reflector softly. 10) do not rotate or tilt the signal interface connec tor of the tft module when you insert or remove other connector into the signal interface connector. 11) do not twist or bend the tft module when installa tion of the tft module into an enclosure (notebook pc bezel, for example). it should be taken into c onsideration that no bending/twisting forces are applied to the tft module from outside when designing t he enclosure. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a sma ll amount of mercury. please follow local regulations for disposal. 13) the lcd module cont ains a small amount of material that has no flammability grade, so it should be supplied by power complied with requirement s of lim ited power source (2.1 1, iec60950 or ul1950). 14) the ccfl in the lcd module is supplied with limi ted current circuit (2.4, iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 4/4 www.datasheet.co.kr datasheet pdf - http://www..net/
2.0 general description this specification applies to the 14.1 inch color tft/lcd module b141xg08 v3 this module is designed for a display uni t of notebook style personal computer. the screen format is intended to support the xga ( 1024(h) x 768(v)) screen and 262k colors (rgb 6-bits data driver). all input signals are lvds interface compatible. this module does not contain an inverter card for backlight. 2 2 . . 1 1 d d i i s s p p l l a a y y c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s the following items are characteri stics summary on the table under 25 j condition: i t e m s u n i t s p e c i f i c a t i o n s screen diagonal [mm] 357(14.1") active area [mm] 285.7(h) x 214.3(v) pixels h x v 1024(x3) x 768 pixel pitch [mm] 0.279(per one triad) x 0.279 pixel arrangement r.g.b. vertical stripe display mode normally white typical white luminance(ccfl=6.0ma) [cd/m 2 ] 200 typ.(5 points average) contrast ratio 250 : 1 min ,300:1 typ r e s p o n s e t i m e [ m s e c ] 2 5 t y p . nominal input voltage vdd [volt] +3.3 typ. typical power consumption (vdd line + vcfl line) [watt] 5.3 watt (w/o inverter, all blac k pattern)@ lcm circuit 1.4 watt(typ.),b/ l input 3.9 watt(typ.) weight [grams] 420g max. (w/o inverter) physical size [mm] 299(w) x 228(h) x 5.5(d) max. electrical interface r/g/b data , 3 sync, signals, clock (4 pairs lvds) support color native 262k colors ( rgb 6-bit data driver ) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 5/5 www.datasheet.co.kr datasheet pdf - http://www..net/
2 2 . . 2 2 f f u u n n c c t t i i o o n n a a l l b b l l o o c c k k d d i i a a g g r r a a m m the following diagram shows the functional blo ck of the 14.1 inches color tft/lcd module: t f t a rra y/ cel l vdd lcd c o n t r o lle r lc d dr i v e car d b a c k lig h t u n it 1024( r / g / b ) x 3 gnd dc - d c co nv er t e r re f c i r c u i t y- d r i v e r x- d r i v e r rx i n 0 rx i n 1 rx i n 2 rx clk i n (4 pa ir s l v d s ) ja e fi - x b 3 0s l- h f 10 m a t i ng c ont act fi - x c 3 - 1 - 1 5000 m a t i n g h o usi n g ja e f i - x 30h j s t bhsr- 0 2 vs- 1 m a t i n g t y p e sm 0 2 b- bhss- 1 - t b lam p c o n nect o r ( 2 p in ) (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 6/6 www.datasheet.co.kr datasheet pdf - http://www..net/
3.0 absolute maximum ratings absolute maximum ratings of the module is as following: i t e m s y m b o l m i n m a x u n i t c o n d i t i o n s logic/lcd drive voltage vdd -0.3 +4.0 [volt] input voltage of signal vin -0.3 vdd+0.3 [volt] ccfl current icfl - 7 [ma] rms ccfl ignition voltage vs - 1160(25 o c ) v r m s n o t e 1 operating temperature top 0 +50 [ o c ] n o t e 2 operating humidity hop 5 95 [%rh] note 2 storage temperature tst -20 +60 [ o c ] n o t e 2 storage humidity hst 5 95 [%rh] note 2 vibration 2.16 10-500 [g hz] shock 240 , 2 [g ms] half sine wave note 1 : duration = 50msec note 2 : maximum wet-bulb should be 39 j and no condensation. wet bulb temperature chart t w b=39 c operating range storage range (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 7/7 www.datasheet.co.kr datasheet pdf - http://www..net/
4.0 optical characteristics the optical characteristics are measured under stable conditions as follows under 25 j condition: item unit conditions min. ty p. max. note viewing angle [degree] [degree] horizontal (right) cr = 10 (left) 40 40 - - - - [degree] [degree] vertical (upper) cr = 10 (lower) 10 30 - - - - 3,7 u n i f o r m i t y 5 p o i n t s 1 . 2 u n i f o r m i t y 1 3 p o i n t s 1 . 5 2 contrast ratio 250 3 0 0 - 6 response time [ m sec] r i s i n g - 1 0 1 5 [ m s e c ] f a l l i n g - 1 5 2 0 5 color / chromatic i ty r e d x 0.57 0 . 6 0 0 0 . 6 3 coordinates (cie) r e d y 0.31 0 . 3 4 0 0 . 3 7 g r e e n x 0.28 0 . 3 1 0 0 . 3 4 g r e e n y 0.53 0 . 5 6 0 0 . 5 9 b l u e x 0.12 0 . 1 5 0 0 . 1 8 b l u e y 0.10 0 . 1 3 0 0 . 1 6 w h i t e x 0.283 0 . 3 1 3 0 . 3 4 3 white y 0.299 0 . 3 2 9 0 . 3 5 9 3,7 white luminance ccfl 6.0ma [c d/m 2 ] 5 points average 170 2 0 0 - 1 , 3 , 4 note 1: 5 & 13 points position (display area : 285.7mm x 214.3) 1 2 3 4 5 192 38 4 576 76 8 512 256 6 7 8 9 10 11 12 13 10 m m 10 m m 10mm 10 m m (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 8/8 www.datasheet.co.kr datasheet pdf - http://www..net/
note 2: definition of white uniformity: white uniformity is defined as the following with five/th irteen measurements (1~13) at figure in note (1). . maximum brightness of five (1,2,3,4,5) points _ w 5 = minimum brightness of five (1,2,3,4,5) points maximum brightness of thirteen points _ w 13 = minimum brightness of thirteen points note 3: measurement method the lcd module should be stabilized at given temperatur e for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, t he measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. field=2 x lcd panel phot odet ect or (b m - 5a,b m - 7 or equi val e nt ) 50 cm tft-lc d m odul e center of the screen note 4: definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points ?a y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (1). (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 9/9 www.datasheet.co.kr datasheet pdf - http://www..net/
note 5: definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from ?black? to ?white? (falling time) and from ?white? to ?black? (rising ti me), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. "black" tr tf "white" "white" 0% % % 100% s i g n a l ( r e l a t i v e v a l u e ) 10 90 note 6. definition of contrast ratio: contrast ratio is calculated with the following formula. bri g htness on the ?white? state contrast ratio ( cr ) = bri g htness on the ?black? state note 7. definition of viewing angle viewing angle is the measurement of contrast ratio ? 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( c ) horizontal left and right and 90 ( x ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with t he screen rotated about its center to develop the desired measurement viewing angle. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 10/1 0 www.datasheet.co.kr datasheet pdf - http://www..net/
5.0 signal interface 5 5 . . 1 1 c c o o n n n n e e c c t t o o r r s s physical interface is described as for the connector on module. these connectors are capable of accommodating t he following signals and will be following components. connector name / designation for signal connector manufacturer j ae ty pe / part number fi-xb30sl-hf10 mating housing/part number fi-x30h mating contact/part number fi-xc3-1-15000 connector name / designation for lamp connector manufacturer js t ty pe / part number bhsr-02vs-1 mating ty pe / part number sm02b-bhss-1-tb 5 5 . . 2 2 s s i i g g n n a a l l p p i i n n pin# signal name pin# signal name 1 g n d 2 v d d 3 v d d 4 v edid 5 n c 6 clk edid 7 d a t a edid 8 r x i n 0 - 9 r x i n 0 + 1 0 g n d 1 1 r x i n 1 - 1 2 r x i n 1 + 1 3 g n d 1 4 r x i n 2 - 1 5 r x i n 2 + 1 6 g n d 1 7 r x c l k i n - 1 8 rx c l k i n + 1 9 g n d 2 0 ~ 3 0 n c 5 5 . . 3 3 s s i i g g n n a a l l d d e e s s c c r r i i p p t t i i o o n n the module uses a lvds receiver embedded in auo?s asic. lvds is a differential signal technology for lcd interface and high-speed data transfer device. signal name description v edid + 3 .3v edid power clk edid edid clock input data edid edid data input rxin0-, rxin0+ lvds differential data input(red0-red5, green0) rxin1-, rxin1+ lvds differential data input(green1-green5, blue0-blue1) rxin2-, rxin2+ lvds differential data input(blue2- blue5, hsync, vsync, dsptmg) rx clkin-, rx clkin0+ lvds differential clock input vdd +3.3v power supply gnd ground (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 11/1 1 www.datasheet.co.kr datasheet pdf - http://www..net/
note : input signals shall be in low status when vdd is off. internal circuit of lvds inputs are as following. signal name description +re d 5 +re d 4 +re d 3 +re d 2 +re d 1 +re d 0 red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. + g reen 5 + g reen 4 + g reen 3 + g reen 2 + g reen 1 + g reen 0 green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) green-pixel data green-pixel data each green pixel's brightness data consists of these 6 bits pixel data. +blue 5 +blue 4 +blue 3 +blue 2 +blue 1 +blue 0 blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. -dtclk data clock the typical frequency is 65.0 mhz. the signal is used to strobe the pixel data and dsptmg signals. all pixel data shall be valid at the falling edge when the dsptmg signal is high. dsptmg display timing this signal is strobed at the falling edge of -dtclk. when the signal is high, the pixel data shall be valid to be displayed. vsync vertical sy nc the signal is synchronized to -dtclk . hsync horizontal sy nc the signal is synchronized to -dtclk . note: output signals from any system shall be low or hi-z state when vdd is off. 5 5 . . 4 4 s s i i g g n n a a l l e e l l e e c c t t r r i i c c a a l l c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s input signals shall be in low status when vdd is off. it is recommended to refer the specifications of sn75lvds86dgg (texas instruments) in detail. signal electrical characteristics are as follows; p a r a m e t e r c o n d i t i o n m i n m a x u n i t vth differential input high voltage(vcm=+1.2v) 100 [mv] vtl differential input low voltage(vcm=+1.2v) -100 [mv] (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 12/1 2 www.datasheet.co.kr datasheet pdf - http://www..net/
lvds macro ac characteristics are as follows: m i n . m a x . clock frequency (f) 50mhz 67mhz data setup time (tsu) 600ps data hold time (thd) 600ps thd tsu input clock input data t f 5 5 . . 5 5 s s i i g g n n a a l l f f o o r r l l a a m m p p c c o o n n n n e e c c t t o o r r pin # signal name 1 lamp high voltage 2 lamp low voltage (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 13/1 3 www.datasheet.co.kr datasheet pdf - http://www..net/
6.0 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 0 1 1022 1023 1st li n e 768th li n e 7.0 parameter guide line for ccfl inverter parameter min dp-1 max units condition white luminance 5 points average 170 200 ? [c d/m 2 ] (ta=25 j ) ccfl current(icfl) 6.0 7.0 [ma] rms (ta=25 j ) note 2 ccfl frequency(fcfl) 50 60 70 [khz] (ta=25 j ) note 3 ccfl ignition voltage(vs) ? 1 5 0 0 [ v o l t ] rms (ta= 0 j ) note 4 ccfl voltage (reference) (vcfl) ? 650 ? [volt] rms (ta=25 j ) note 5 ccfl power consumption (pcfl) ? 3.9 ? [watt] (ta=25 j ) note 5 note 1 : dp-1 are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and subs tandard luminance or flicker at low power may happen. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 14/1 4 www.datasheet.co.kr datasheet pdf - http://www..net/
*3 in designing an inverter, it is suggested to check safe ty circuit ver carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when ccfl is damaged. *4 generally, ccfl has some amount of delay time after applying start-up voltage. it is recommended to keep on applying start-up voltage for 1 [sec] until discharge. *5 the ccfl inverter operating frequency must be carefully chosen so that no interfering noise stripes on the screen were induced. *6 reducing ccfl current increases ccfl disc harge voltage and generally increases ccfl discharge frequency. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. note 2 : it should be employed the inverter, which has ?duty dimming?, if iccfl is less than 4ma. note 3 : the ccfl inverter operating frequency should be ca refully determined to avoid interference between inverter and tft lcd. note 4: the inverter open voltage should be designed lar ger than the lamp starting voltage at t=0 o c, otherwise backlight may be blinking for a moment after turning on or not be able to turn on. the open voltage should be measured after ballast capacitor. if an inverter has shutdown function it should keep its open voltage. for longer than 1 second even if lamp connector is open. note 5 : calculator value for reference (icflvcfl=pcfl) 8.0 interface t i mings basically, interface timings should match the vesa 1024x768 /60hz (vg901101) manufacturing guide line timing. 8 8 . . 1 1 t t i i m m i i n n g g c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s sy m b o l d e s c r i p t i o n m i n ty p m a x u n i t fdc k dtclk frequency 65.00 [mhz ] tc k dtclk cy cle time 15.38 [ n sec] tx x total time 1206 1344 2047 [ t ck] tac x x ac tive time 129 1024 [ t ck] tbk x x blank time 90 320 [ t ck] hsy n c h frequency 48.363 [khz ] hsw h-sy nc width 2 136 [ t ck] hbp h back porch 1 160 [ t ck] hfp h front porch 0 24 [ t ck] ty y total time 771 806 1023 [tx] tac y y ac tive time 768 [tx] vs ync frame rate (55) 60 61 [hz ] vw v-sync width 1 6 [tx] vfp v-sync front porch 1 3 [tx] vbp v-sync back porch 7 29 63 [tx] note: hsw(h-sync width) + hbp(h-sync back porch) should be less than 515 tck. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 15/1 5 www.datasheet.co.kr datasheet pdf - http://www..net/
8 8 . . 2 2 t t i i m m i i n n g g d d e e f f i i n n i i t t i i o o n n tx hs w hb p hf p t acx h- sy n c ds pt m 38h vf p vb p vw t acy v- sy nc d s ptm g (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 16/1 6 www.datasheet.co.kr datasheet pdf - http://www..net/
9.0 power consumption input power specificat ions are as follows; sy mbol parameter min ty p max units condition module v d d l o g i c / l c d d r i v e voltage 3.0 3.3 3.6 [volt] load capacitance 20uf pdd vdd power 1.4 [watt] all blac k pattern pdd max vdd power max 1.65 [watt] max pattern note idd idd current 350 ma 64 grayscale pattern idd max idd current max 450 ma vertical stripe line pattern note v d d r p a l l o w a b l e logic/lcd drive ripple voltage 1 0 0 [ m v ] p-p v d d n s a l l o w a b l e logic/lcd drive ripple noise 1 0 0 [ m v ] p-p lamp i c f l c c f l c u r r e n t 3 . 0 6 . 0 7 . 0 [ m a ] rms (ta=25 j ) v c f l c c f l v o l t a g e (reference) ? ? j ) p c f l c c f l p o w e r consumption ? ? j ) total pow e r consumption 5.3 watt (w/o inverter, all black pattern)@ lcm circuit 1.4 watt(typ.),b/l input 3.9 watt(typ.) note : vdd=3.3v (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 17/1 7 www.datasheet.co.kr datasheet pdf - http://www..net/
10. power on/off sequence vdd power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. sequence of power-on/off and signal-on/off 1ms ?? t1 ?? 10ms 6ms ?? t2 ?? 50ms 0ms ?? t3 ?? 50ms 400ms ?? t4 200ms ?? t5 200ms ?? t6 t4 t3 t2 t5 valid t1 0.1vdd 0.9vdd 0.1vdd 0.9vdd t6 power supply vdd lvds interface backlight on apply the lamp voltage within the lcd operating range. when the backlight turns on before the lcd operation or the lcd turns off before the backlight turns off, the display may momentarily become abnormal. (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 18/1 8 www.datasheet.co.kr datasheet pdf - http://www..net/
1 1 .0 reliability /safety requirement 1 1 1 1 . . 1 1 r r e e l l i i a a b b i i l l i i t t y y t t e e s s t t c c o o n n d d i i t t i i o o n n s s i t e m s r e q u i r e d c o n d i t i o n temperature humidity bias 40 j /90%,300hr high temperature operation 50 j /dry,300hr low temperature operation 0 j ,500hr continuous life 25 j ,2000 hours on/off test on/30 sec. off/30sec., 30,000 cycles hot storage 60 j /40% rh ,240 hours cold storage -20 j /50% rh ,240 hours thermal shock test -20 j /30 min ,60 j /30 min 100cycles hot start tes t 50 j /1 hr min. power on/off per 5 minutes, 5 times cold start tes t 0 j /1 hr min. power on/off per 5 minutes, 5 times shock test (non-operating) 240g, 2ms, half-sine wave vibration test (non-operating) sinusoidal vibration, 1.5g zero-to-peak, 10 to 500 hz, 0.5 octave/minute; 0.5hr in each of three mutually perpendicular axes. esd contact : operation ? 8kv / non-operation ? 10kv air : operation ? 15kv / non-operation ? 20kv altitude test 10000 ft / operation / 8hr 30000ft / non-operation / 24r maximum side mount torque 2.5kgf.cm . ccfl life : 10,000 hours minimum mtbf(excluding the ccfl) : 30,000 hours with a confidence level 90% 1 1 1 1 . . 2 2 s s a a f f e e t t y y ul 60950 (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 19/1 9 www.datasheet.co.kr datasheet pdf - http://www..net/
12.0 packing dimension carton side cushion for ma rk 14 " use pa pe r pad top cushion posit ion carton la bel "h " taping cl ose 14.1" pa nel * 20 pcs 14.1" panel es d bag (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 20/2 0 www.datasheet.co.kr datasheet pdf - http://www..net/
13.0 mechanical characteristics 1 1 3 3 . . 1 1 l l c c m m o o u u t t l l i i n n e e d d i i m m e e n n s s i i o o n n ( ( f f r r o o n n t t v v i i e e w w ) ) (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 21/2 1 www.datasheet.co.kr datasheet pdf - http://www..net/
1 1 3 3 . . 2 2 l l c c m m o o u u t t l l i i n n e e d d i i m m e e n n s s i i o o n n ( ( r r e e a a r r v v i i e e w w ) ) b 141 xg 08 59. 14b 17. 00 1- m 1 7 1 1 3 3 . . 3 3 s s c c r r e e w w h h o o l l e e d d e e p p t t h h a a n n d d c c e e n n t t e e r r p p o o s s i i t t i i o o n n screw hole minimum depth, from side surface =2.5 mm (see drawing) screw hole center location, from front surface = 2.8 (c) copy right au optronics dec., 2002 all rights reserved. b141xg08 v.3 no reproduction and redistribution allow ed. 22/2 2 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of B141XG08-V3

	To Download B141XG08-V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .